Related to : How to Change an Airsoft Barrel
|
| How to Change Your Airsoft Gun Color |
| Hobbies, Games & Toys |
 |
Airsoft guns are in most cases replications of modern, historical or
antique firearms. The guns are typically produced in a finish such as
flat black or silver which corresponds to the firearm being copied.
Many airsoft gun owners decide to change the color of their guns.
Camouflage patterns are one very popular paint pattern as this allows
for individual expression as well as possibly providing a competitive
edge during game play. Special spray paints are available which are
specifically designed to bond with plastic
materials.Difficulty:ModerateInstructions Things You'll
Need
Airsoft gun
Spray paint (Krylon)
Newspaper
Painters
tape
Unload the airsoft
|
| How to Change a Browning A5 Barrel |
| Hobbies, Games & Toys |
 |
The browning Auto 5 is a semi-automatic shotgun manufactured by
Browning for sporting clays and game hunting. Many users change their
barrel in order to use different chokes tubes. A shotgun barrel will
also have to be changed due to corrosion or rust on the unit. If you
have a Browning A5 that needs a new barrel, you can change it without
much knowledge of the subject or experience with
guns.Difficulty:EasyInstructions Things You'll Need
New A5
barrel
Unload the A5 by pulling back on the gun's
action lever. This is the lever where you load the shells into the
gun. Pull it back multiple times to make sure there are no shells in
the gun.
Pull the operating lev
|
| How to Change the Barrel on a M-60 |
| Hobbies, Games & Toys |
 |
The M60 machine gun entered service at the end of the Korean War. It
was the principal machine gun of the United States military until the
introduction of the M240 in 1977. Design of the M60's operating
action was based on the World War Two German MG42. The gas-operated
M60 fires a maximum of 550 7.62 mm rounds per minute in cyclic mode
with a muzzle velocity of 2,800 feet per second. In sustained fire
mode, the rate of fire is 100 rounds per minute. Ammunition is
belt-fed from a box magazine, and effective range is 1,093 yards.
Battlefield conditions of continuous fire may overheat its 22-inch
barrel. Removal and exchange of an overheated M-60 barrel in the field
is possible with a quick
|
| How to Change the Barrel on an MP40 |
| Hobbies, Games & Toys |
 |
The MP40 is a two-hand wielding gun, an evolutionary step-up from the
MP38. You can change the barrel on your MP40 with ease by following a
few simple steps. This will maximize your safety and avoid damage to
the gun. You will have a brand new barrel and a cleanly-functioning
MP40 because of your carefully-executed
procedure.Difficulty:Moderately EasyInstructions Things You'll
Need
Wrench
Turn on the safety. You always want
to secure the safety when changing gun parts. Remove all ammunition
from the MP40.
Use a wrench to remove the muzzle nut. Place the
muzzle nut in a safe location so that you can reattach it
later.
Unscrew the barrel. Replace it with a n
|
| How to Change an MP5 Airsoft Barrel |
| Hobbies, Games & Toys |
|
Airsoft guns duplicate the experience of a real weapon by being
constructed in the same fashion as the weapon they are based on.
Airsoft gun parts that are made of plastic can develop cracks and
require replacement if the gun is to continue being used. A defective
barrel in an MP5 airsoft gun can be replaced with one from another MP5
or a similarly-styled airsoft gun, once the MP5 gun has been
disassembled. You will need a few hardware tools in order to
disassemble the MP5 airsoft gun so that the barrel can be removed and
replaced.Difficulty:ModerateInstructions Things You'll Need
Bath
towel
Phillips screwdriver
Replacement MP5 barrel
Put a bath towel down
|
| How to Change the Hop Up in an Airsoft |
| Hobbies, Games & Toys |
|
Airsoft guns with the “hop” system shoot farther than
normally possible with lightweight ammunition. The
“hop-up” is a device that increases the backspin on the BB
pellet, which increases the distance of that BB’s travel.
Adjusting the “hop-up” in an airsoft is a simple procedure
that takes about 15 minutes. It makes aiming of the airsoft much
easier, and makes you enjoy playing games that use airsoft guns, such
as paintball.Difficulty:ModerateInstructions Read the
manufacturer’s manual carefully so that you are familiar with
the airsoft gun’s parts and their functions.
Determine the
firing distance (range) to which you are most lik
|
| How to Change Firing Pins in Airsoft Guns |
| Hobbies, Games & Toys |
 |
Proper maintenance of an Airsoft-brand pellet gun involves cleaning
out the mechanism and replacing parts that have worn down and are no
longer operating at peak efficiency. You can replace the firing pin of
the Walter P99 Airsoft-brand pellet gun to guarantee more accurate
firing. You will need a few hardware tools and a replacement firing
pin purchased from a hobby shop or Airsoft gun authorized dealer. The
procedure is straightforward and does not violate the warranty because
disassembly for cleaning is expected by the
manufacturer.Difficulty:ModerateInstructions Things You'll
Need
Soft cloth
Phillips screwdriver
Replacement firing
pin
Compressed air
Tweezers
|
