Zv 5000 stopped working overight


HOME ยป Hardware

I will open up by saying that the computer was dropped yesterday from a low level and it cracked a little piece of plastic. I turned the computer on rigt after that to check it and it worked and continued to work for the 2.5 hours of use(plugged into a power inverter in a car, which has never given me problems before but thought Id mention it). After the drive I tuned it back on, on battery power at home and it continued to work fine. Left it to go into hibernation mode, which im assuming it didnt because it seems as though the battery was dead when i got to it this morning. Well I tried to plug it in to charge and to use it and all that happened was the power light on the front flash


Related to : Zv 5000 stopped working overight
Bluetooth Mouse 5000 not working
Hardware
Thinkpad X200s (most recent model) RC x64 installed. The Microsoft BT Mouse 5000 connects but does not move. It previously worked under Vista. My Blackberry 8330 does connect and work via Bluetooth (but there are two Bluetooth Peripheral Devices under other devices that are not found).
In device manager under Bluetooth radio is two drivers:
1. Microsoft Bluetooth Enumerator
2. Thinkpad Bluetooth 2.1 with Enhanced Data Rate
When I move the mouse, the Bluetooth Icon and bubble comes active "A Bluetooth Device is trying to connect" and asks me for the connection code (there is none and it was already connected) -- since there is no code I tr
Windows installer has stopped working or setup.exe has stopped working
Hardware
HI,
I'VE INSTTALED WINDOWS 7 PROF.ON MY PC. I M TRYING TO INSTALL WINDOWS7ULTIMATE BY CLICKING ON SETUP.EXE AN ERROR MASSAGE APPEARED SAYING: [WINDOWS INSTALLER HAS STOPPED WORKING] THEN I TRIED TO INSTALL WINDOWS 8 ON MY PC.. BUT THE ERROR MASSAGE APPEARED SAYING SAME THING [WINDOWS INSTALLER HAS STOPPED WORKING] AND ALL OTHER SETUP IN THAT DRIVE ARE SAYING SAME THING.....DON'T KNOW WTTD.....HHHHHHHHHHHHHEEEEEEEEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPP!
I'M IN BIG TROUBLE NOTHING IS GOING TO INSTALL
ERROR
Problem signature:
Problem Event Name: APPCRASH
Application Name: setup.exe_Microsoft
Juniper Netscreen 5200 for sale w/ Dual Power + 5000-M2 and 5000-8G
Hardware
3 Attachment(s)
Selling Juniper Netscreen 5200 w/ 5000-M2 in the first slot and 5000-8G in the second slot. Unit is in working condition with normal wear scratches on top.
I have attached images.
Looking to sell for a very competitive $1500 + $100 in shipping/handling.
Please PM me if interested.

Zv 5000 stopped working overight
Hardware

I will open up by saying that the computer was dropped yesterday from a low level and it cracked a little piece of plastic. I turned the computer on rigt after that to check it and it worked and continued to work for the 2.5 hours of use(plugged into a power inverter in a car, which has never given me problems before but thought Id mention it). After the drive I tuned it back on, on battery power at home and it continued to work fine. Left it to go into hibernation mode, which im assuming it didnt because it seems as though the battery was dead when i got to it this morning. Well I tried to plug it in to charge and to use it and all that happened was the power light on the front flash

[ubuntu] Samba worked, then stopped working, then started working, then stopped again.
Hardware
I have no idea what is going on. I had samba working with different shares and users. Then, after a reboot (for ftp reasons, not touching samba at all) when I tried to log on from xp the log on window just flashed. I tried it four times with different user names. I tried rebooting all the clients. Then I rebooted the server, restarted samba and it worked. After about an hour it started doing the same thing. FTP and SSH are still working fine. I also tried rebooting the samba service many times too.
Here is the smb.conf even though there is nothing on it.
Code:
[global]
[ubuntu] sudo stopped working after samba smb edit, plus su - password also stopped working!
Hardware
Hello all!
I am very new to Ubuntu server (11.04) and am hoping this is a simple fix.
I was editing the smb.conf in samba to allow for group access sharing folders. Before doing this I added the groups, added users, set the users passwords, etc. After adding folders in the smb.conf (I was following a tutorial), I exited the vi with wq and then restarted the virtual machine (VirtualBox). After the restart I went back to edit it again to correct a name mistake and the server would no longer accept my username, saying it was not in the sudoers file. Tried to use visudo to fix, but the machine would not take the root password. I'm assuming the root password is mine, bei

Privacy Policy - Copyrights Notice - Feedback - Report Violation - RSS 2017 © bighow.org All Rights Reserved .