How to setup two Cisco 1921s in a single site Windows domain


I have two Cisco 1921s that will be used in the same Windows domain
network (corp.example.com). The first router will be in the data
center. The second router will be a dedicated router sitting in a
separate office (CEO's office which is in the same building). The
router will be in the CEOs office only to provide the best routing
performance (using QoS). The first router will serve as a default
gateway under a Class C 192.168.0.1 network. It will have an IP
address of 192.168.1.1. The second router will have an IP address of
192.168.2.1. I am at a loss on how to configure the routers to exist
in the same windows domain network.




  1. I want the second router to be able to find other devices in
    the 192.168.1.1-254 range, and vice versa. The first router should be
    able to find any devices in the 192.168.2.1-254 range.


  2. Devices connected to second router will need to be able to have
    access to the domain controllers/dns servers that are connected to the
    first router (through an unmanaged switch). The two domain controllers
    are addressed 192.168.1.30 and 192.168.1.35, respectfully.




What commands/configurations will I need on each router?

I can already achieve squid authentication with windows domain group
,but how to verify a single windows domain users?
squid.conf />external_acl_type NT_global_group %LOGIN
/usr/lib/squid/wbinfo_group.pl
acl ProxyUsers external
NT_global_group NTusers
acl AuthenticatedUsers proxy_auth
REQUIRED
http_access allow AuthenticatedUsers ProxyUsers
I
used debian 4.0
Ubuntu
Dear colleges,
As far as i got it from the forums, i suppose
it's working on ubuntu < 9.04?! I spent some days reading mans and
forums but still no luck getting it done:
i have mintlinux7
(ubuntu 9.04)joined to NT4 domain as a domain member.
(i did it
by net rpc join ...)
so domain users may login locally to Gnome
using their domain accounts (either by domainuser or by simple user as
far as i use winbind use default domain = yes)they got their homes
created and all seems to work great. Also ssh local logins using
domain accounts are working great.
when users open network
neighborhood it shows all the servers in domain allowing to enter e
Ubuntu
Hello!
In the office there is a local network with samba+openldap
PDC. The local domain name is company.net. The company desided to
create a corporate Website on a remote hosting and desided that the
site's domain should be company.net which is same as local network's
domain name. So now it is not possible to reach that corporate website
from within the company's local network because, as I guess, bind9
which is installed on above menioned PDC looks for company.net on a
local webserver. Is there a possibility to let people from this local
network browse the remote site?
Thanks in advance.
Ubuntu
Hello Everyone,
We would like to setup a site to site VPN with
OpenVPN. We have already installed OpenVPN on our Ubuntu 12.04 server.
Now, how do we setup the client network side which in this case is a
Windows network? Can you guys help me how to configure the OpenVPN
client host on the client side?
Thank You,
Arnel
Ubuntu

I am trying to configure a server running IIS 6 and with hosts
multiple sites with a ssl cert and would like to know if that is
possible and if anyone has done so before and how

Network & Servers

I have two Cisco 1921s that will be used in the same Windows domain
network (corp.example.com). The first router will be in the data
center. The second router will be a dedicated router sitting in a
separate office (CEO's office which is in the same building). The
router will be in the CEOs office only to provide the best routing
performance (using QoS). The first router will serve as a default
gateway under a Class C 192.168.0.1 network. It will have an IP
address of 192.168.1.1. The second router will have an IP address of
192.168.2.1. I am at a loss on how to configure the routers to exist
in the same windows domain network.




  1. I want the second router to be able to find other devices in
    the 192.168.1.1-254 range, and vice versa. The first router should be
    able to find any devices in the 192.168.2.1-254 range.


  2. Devices connected to second router will need to be able to have
    access to the domain controllers/dns servers that are connected to the
    first router (through an unmanaged switch). The two domain controllers
    are addressed 192.168.1.30 and 192.168.1.35, respectfully.




What commands/configurations will I need on each router?

Network & Servers

- Technology - Languages
+ Webmasters
+ Development
+ Development Tools
+ Internet
+ Mobile Programming
+ Linux
+ Unix
+ Apple
+ Ubuntu
+ Mobile & Tablets
+ Databases
+ Android
+ Network & Servers
+ Operating Systems
+ Coding
+ Design Software
+ Web Development
+ Game Development
+ Access
+ Excel
+ Web Design
+ Web Hosting
+ Web Site Reviews
+ Domain Name
+ Information Security
+ Software
+ Computers
+ Electronics
+ Hardware
+ Windows
+ PHP
+ ASP/ASP.Net
+ C/C++/C#
+ VB/VB.Net
+ JAVA
+ Javascript
+ Programming
Privacy Policy - Copyrights Notice - Feedback - Report Violation 2018 © BigHow