How to reverse arp using nping for Windows



I would like to send a reverse ARP to resolve an IP address given a MAC address using nping for Windows.

The documentation is not clear on how this should work and I'm unable to find any examples online. Can anybody assist?

Here is what I have tried:

C:>nping --arp --arp-type rarp-request --arp-target-mac
00-AA-BB-CC-DD-EE
WARNING: No targets were specified, so 0 hosts pinged.

C:>nping --arp --arp-type rarp-request --arp-target-mac
00-AA-BB-CC-DD-EE 10.10.10.10
Starting Nping 0.6.47
SENT (0.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE
SENT (1.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE
SENT (2.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE
SENT (3.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE

Max rtt: N/A | Min rtt: N/a | Avg rtt: N/A
Raw packets sent: 5 (210B) | Rcvd: 0 (0B) | Lost: 5 (100.00%)

Related to : How to reverse arp using nping for Windows
[all variants] arp spoofing vs arp poisoning
Network & Servers
Hi all,
can anyone explain me the subtle difference between arp spoofing &
arp poisoning ?
The REVERSE Windows Tax
Network & Servers
Norton pays OEM's to include their crummy antivirus preinstalled.
I got a computer a few years back that included some niche MMO preinstalled -- I'm sure some money exchanged hands for that, too.
Conceivably, if I was willing to accept mountains and mountains of malware and crap preinstalled... how far could that bring the cost down?
I'm talking yahoo toolbar, AntiVirus 2009, Windows Genuine Advantage malware, 5,000 porn popups every time I open Internet Explorer, AOL preinstalled, etc, etc.
Assuming the more preinstalled crap I was willing to accept continued to bring the price down, that would be great. $150 desktop. Wipe the rubbish and
No ARP Replies for manual arp entries (Proxy ARP)
Network & Servers
ubuntu12:~# uname -r
3.2.0-54-generic-pae
ubuntu12:~# arp -a
other (192.168.1.10) auf <from_interface> PERM PUB auf eth1
winhost (192.168.1.2) auf <from_interface> PERM PUB auf eth3
ubuntu12:~# cat /proc/sys/net/ipv4/conf/eth1/proxy_arp
1
winhost:~#ping 192.168.1.10
...
ubuntu12:~# tcpdump -i eth1 | grep ARP
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes
19:47:43.266878 ARP, Request who-has other tell winhost, length 28
19:47:44.108996 ARP, Request who-has other tell winhost,
Can I temporarily affect ARP table without using `arp` command directly?
Network & Servers

I have some knowledge about arp command under linux which can help modify the ARP table. Now I want to temporarily affect ARP table(add, delete and change) entries without the help of arp.

For temporarily adding a new entry in ARP table, I can ping an unknown host and the a new pair for (new_host_ip, new_host_hw_addr) will be inserted into APR table.(correct me if this can not always complete the insertion).

My question is can I delete and change entries in ARP table without using arp directly just like the way inserting an ARP entry above?


I made a 180 frame animated gif in photoshop. But when I tried to reverse it, the reverse part of the animation flickers.
Network & Servers

I was using the timeline in photoshop. I selected all 160 frames, pasted them after frame 180, then selected from 181 onwards and used the reverse option. However although the animation plays nicely when i play it forward (after exporting the fig), when it gets to the reverse part it flickers.  What am I doing wrong please?

Riesa


How to reverse arp using nping for Windows
Network & Servers

I would like to send a reverse ARP to resolve an IP address given a MAC address using nping for Windows.

The documentation is not clear on how this should work and I'm unable to find any examples online. Can anybody assist?

Here is what I have tried:

C:>nping --arp --arp-type rarp-request --arp-target-mac
00-AA-BB-CC-DD-EE
WARNING: No targets were specified, so 0 hosts pinged.

C:>nping --arp --arp-type rarp-request --arp-target-mac
00-AA-BB-CC-DD-EE 10.10.10.10
Starting Nping 0.6.47
SENT (0.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE
SENT (1.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE
SENT (2.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE
SENT (3.1560s) RARP who is 00:AA:BB:CC:DD:EE? Tell 00:AA:BB:CC:DD:EE

Max rtt: N/A | Min rtt: N/a | Avg rtt: N/A
Raw packets sent: 5 (210B) | Rcvd: 0 (0B) | Lost: 5 (100.00%)


Privacy Policy - Copyrights Notice - Feedback - Report Violation - RSS 2017 © bighow.org All Rights Reserved .