CM13 Update result: (Soft)Brick



Hi Guys,

yesterday i wanted to update (dirtyflash) my lg g3, because the 2312-Build of CM13 was extremely buggy (Restarts, Blackscreen by ingoing calls, etc.) I´ve done this before about 10thousand times and on 100 other phones, but yesterday after the flash in TWRP the TWRP wasn´t able to delete the cache.

I tried to flash again to delete dalvik and cache afterwards clean, this time it worked. The phone was booting to the PIN-Entry but it freezes - no entry possible.

I want to try flash back an older build, but phone stucks in bootloop - so i have to manually enter recovery to get into twrp. I flashed an older cm13 build 1812 and cache deleting was not possible again.

Yesterday was Xmas so i thought i will fix it today, but on first time when i tried to get manually into recovery mode, the question for deleting all data appeared, but after that TWRP wasn´t starting, just the stuck lg logo again. (Battery was pulled out for the whole night)

Now im not able to boot into recovery mode anymore or do something else. I tried the download mode (Vol+ and then plug in USB) without access.

I cant do something, just look at the beautiful LG Logo - have you guys some advice for me? What could i try? :confused:

THX

Related to : CM13 Update result: (Soft)Brick
Soft Brick?? HELP!
Android
Ok, so I rooted my phone using a method where i flashed an older kernel then used towelroot to root, and then flashed back to NJ4. All was going well, and i installed the safestrap recovery. Then, today i was tryin to install the CM12 for the S4, and i messed up where i put the files for this, so when i was in safestrap, it told me it failed. I hit reboot, and that is when my phone essentially 'soft bricked'. I tries to boot up, fails and goes into download mode. I tried pulling out the battery, tried to go into recovery, but i cant do it. I tried to flash 4.2.2. stock s4 firmware thru odin, but it kept saying "Can't open the serial(COM) port." and fails. I can't do anything right now, please help im panicking Dx

T700 Soft Brick
Android
Looks I've managed a soft brick. I've been able to get it back into recovery and I've been able to push stock recovery (and also just tried TRWP). Odin seems to work and the T700 appears to accept the recovery. Following reboot I'm still getting stuck back to the Samsung boot animation but then I'm stuck at the boot screen; nothing past that.

I'm not sure if this should help any, but while in recovery mode the upper corner reads the following:
ODIN MODE
PRODUCT NAME: SM-T700
CURRENT BINARY: Custom (after flashing TRWP, when flashed with stock it said 'Samsung Official')
SYSTEM STATUS: Custom

I would appreciate any assistance and thanks in advance! This is my first soft brick since Eclair!

[Q] help need for a Soft brick device...
Android
hi everbody,

im a kind of lost for this one, i asked earlier if the LG-D850 roms was compatible for the LG-D852 and a user says me yes. so after flasing a D852 recovery and flashed a D850 rom, i am right now stuck in fastboot mode. I been able to go to download mode but I cant flash the D852 stock factory image with the lg flashtool because my phone thinks he a D850 device. So what should I do for this one ? flash a att stock factory image with the flashtool or that move will screw up my device for good ? Any ideas to get back my original model number ?:crying:

thanks for your reading and happy holidays

Xperia S soft brick
Android
Hi all, I hope you can help me with my problem. Today I decided to modify the toggles on my Xperia S, wich is on latest stock Jellybean with DoomKernel, with this http://forum.xda-developers.com/show....php?t=2072757 but then, too late because I had already flashed the .zip package, I realised that it was for ICS stock. Luckily I have a twrp backup, but when I try to restore it I get stuck (also if the blue bar keeps on going) on "Formatting system using make-ext4fs" and then it turns off automatically, but nothing about a successful restore appears. I know I can flash the stock image using Emma, I did it before, but since I won't access to a strong wi-fi connection till the end of the holidays, I would prefer to avoid that and use my twrp working backup. Thanks in advance to you all.
Best regards
Alessandro

[HELP] Soft-brick my phone (I think)
Android
Hello, I have been trying to flash for 2 days now but still couldn't get it working.

Initially, my I9305 is running on stock without root. I wanted to root it and then install recovery and ROM.
And so I prepare the necessary files, and start to flash.

I used CF-Auto-Root to root my device first, then got Resurrection ROM and Gapps to flash.
Then I started to get some issue, as it always fail. Error message like no file context and so on. So I read online resources, and found out that I had a older version of TWRP installed which may cause the install.
I then tried to upgrade TWRP but it doesn't allow me to. No choice, I had to flash philz touch, and I did.

I then tried to flash Resurrection again, boot up, and it keep giving me bootloop. After which I downloaded nameless ROM, and CM11 but same issue.
Yesterday night, I downloaded the stock firmware to try. I flashed it, and it is successful based on ODIN, but it still won't boot up.

I just tried it again and it stuck on the Samsung logo screen.

Can anyone tell me what else to do? What I have to do?
This is the stock firmware that I have downloaded and flash - I9305XXUENH1_I9305EVRENH1_EVR.

Let me know what other information I have to provide.

Thanks!

Here's the Download mode information.

Custom binary count: 9 counts
Current binary: samsung offical
System status: custom
Knox void: 1
RP SWREV: A2

Update: 16/1

I just tried to go into my recovery mode and apparently, it has been changed back to stock recovery which I assume is because I have flashed the stock firmware.
I am trying it yet again after wiping in stock recovery, to flash the stock firmware again now.

P.S: I have posted it in http://forum.xda-developers.com/gala...rnels-t2999494 but no reply. So trying my luck here.

CM13 Update result: (Soft)Brick
Android
Hi Guys,

yesterday i wanted to update (dirtyflash) my lg g3, because the 2312-Build of CM13 was extremely buggy (Restarts, Blackscreen by ingoing calls, etc.) I´ve done this before about 10thousand times and on 100 other phones, but yesterday after the flash in TWRP the TWRP wasn´t able to delete the cache.

I tried to flash again to delete dalvik and cache afterwards clean, this time it worked. The phone was booting to the PIN-Entry but it freezes - no entry possible.

I want to try flash back an older build, but phone stucks in bootloop - so i have to manually enter recovery to get into twrp. I flashed an older cm13 build 1812 and cache deleting was not possible again.

Yesterday was Xmas so i thought i will fix it today, but on first time when i tried to get manually into recovery mode, the question for deleting all data appeared, but after that TWRP wasn´t starting, just the stuck lg logo again. (Battery was pulled out for the whole night)

Now im not able to boot into recovery mode anymore or do something else. I tried the download mode (Vol+ and then plug in USB) without access.

I cant do something, just look at the beautiful LG Logo - have you guys some advice for me? What could i try? :confused:

THX


Privacy Policy - Copyrights Notice - Feedback - Report Violation - RSS 2017 © bighow.org All Rights Reserved .