basic checklist of things to check to secure a router and wireless network with IP cams



Suppose I have a brand new router, and I have set up some basic things just to get a wireless home network going:I created an SSID name for the network, and it's WPA2-PSK protected. I also added a password for the router "admin" in order to prevent others allowed in the network from modifying the router settings.The router gateway/settings cannot be accessed from WAN.I also had needed to do some port fwding on some ports in order to access security IP cams from the internet. Thus for ex: h

Related to : basic checklist of things to check to secure a router and wireless network with IP cams
Ad-Hoc network from wireless router
Information Security

Hello!
Is it possible to create a small wireless network by using a router, except that the router itself is not the access point. Rather the router connects wirelessly to another wireless router, and then using the internet-connected router as its gateway/accesspoint, creates another subnet network that I can then use to add my own devices, laptops, and NAS, etc.?
Was that clear? Please let me know if that did not make sense.

Adding Wireless Router to Existing Network/Router ?
Information Security

I'm new to this forum. I've tried searching for an answer but didn't find one.
I have a home network with a D-Link router and DSL modem. There are five computers wired to the network. I would like to add a Netgear WGT624 wireless router to my office computer so I can access it and the internet wirelessly through 1-2 of our laptops. I don't want to go completely wireless at this time.
Where can I find out how to add this second router to my network (if it can be done at all)? I can't get it to work and assume I have to disable some settings, perhaps manually set up some IP addresses, etc. I'm pretty lost and any h
coonecting wireless router to router within network
Information Security

I have just purchased a NETGEAR wireless router to add to an existing setup with and Origo router with USB print server built in. I need to keep the print server facility but also need wireless for two laptops. I have proceeded as far as I can with disabling DHCP on the NETGEAR with no success. At present I have swapped over routers, the NETGEAR is now the primary router with DHCP and the Origo with print server is connected to a LAN port on the NETGEAR, I do not seem to be able to connect to any printers or access the ORIGOs internal settings via a browser.

Basic things to do to make sure a server is secure?
Information Security
Basic things to do to make sure a server is secure?
 
Hi:
What would you say are the most important/ fundamental things to do or change after receiving a Linux (lets say cPanel) server to secure it? This assuming all software and OS are up to date. I'm not talking about super paranoid or complex security precautions, but easily applicable, essential things that all server owners should do and that won't break any php/cgi script either.
Thanks,

I have a wireless wifi router with Ethernet connections and would like to make it secure. (ubuntu 12.04 on my computer)
Information Security
What I have currently is a laptop that I email and browse the web with. I also bank on line I am thinking of getting another computer so as to have one for each use. Some have told be to create a server computer and some have told me to use more than one router with a server computer and this would give me lots of firewall protection. I am not only ignorant but also confused. My skills are not great in Computer jargon. However I do manage to get drivers and software installed after hours o
basic checklist of things to check to secure a router and wireless network with IP cams
Information Security
Suppose I have a brand new router, and I have set up some basic things just to get a wireless home network going:I created an SSID name for the network, and it's WPA2-PSK protected. I also added a password for the router "admin" in order to prevent others allowed in the network from modifying the router settings.The router gateway/settings cannot be accessed from WAN.I also had needed to do some port fwding on some ports in order to access security IP cams from the internet. Thus for ex: h

HD Wallpapers
3D
3D Abstract
City
Celebrities
Indian Celebrities
Cars
Travel
Girls
Animals Birds
Movies
Sports
Black White
Nature
Planes
Anime
Food Drink
Dreamy Fantasy
Architecture
Games
Space
Holidays
Flowers
Love
Artistic
Baby
Beach
Bikes Motorcycles
Macro
Computers
Vector
Funny
Army
Textures
Brands
Misc
Music
Other
Privacy Policy - Copyrights Notice - Feedback - Report Violation - RSS 2017 © bighow.org All Rights Reserved .